Before you begin using your new Panasonic DECT system, we would like to provide you with a brief overview of the steps required for installation.

1. Add DECT base (KX-UDS124) on the administration portal.
2. Add DECT mobile handsets (KX-UDT1x1) on the administration portal.
3. Add a phone extension for the DECT mobile handsets on the administration portal and assign the respective enddevice.
4. Register mobile handsets to base.
5. The following pages provide a detailed description of the individual steps.

The KX-UDT-1X1 mobile handsets are registered to your phone system by the next steps:

To assign a handset to a user (e.g. John Doe), you follow the next steps:

The base is automatically registered. During the final step, you must register the mobile handset to the base. This is done using the menu of your Panasonic mobile handset.

1. You will see "Regsister Unit" on your display. Press OK: Registration
2. Now push (and hold) for approx. 5 seconds the OK button.
3. The handset is registered automatically, this can take a while if a new firmware needs to be installed.
4. After registration the display shows the next information: extension: name.

Press .

- Dial the telephone number.
- Press .

- Press  or .

- Select the desired telephone number or , then press

- Press or press

- Select the desired telephone number or , then press

If a call is received from a phone number stored in the phonebook, the number and name of the caller will be displayed in the call log.- While in standby mode, press or .- Press or to select an outgoing call record, and then press

- To end a call press.

- Toggle between Receiver mode and Hands-free mode during a conversation, press .During a conversation using a headset, Hands-free mode does not work..

- During a conversation, press or    to adjust the volume (Level 1–6).

If you receive a call, the ringer indicator illuminates.

- To answer an incoming call, press .
- To end the call press   or return the mobile handset to the charger.

Missed calls are indicated in the display of the mobile telephone (“Missed Calls”) and the ringer indicator flashes.

- To access the missed calls list, press the  button.

- Press or   to select an incoming call record and then press .

To delete the entry or to save it to the phonebook press the button and select your decision.

You can put a call on hold by holding the call at your extension.

- Press   during an external call, then press . The active call is now placed on “Hold”.

- Press .
- Press the dial key corresponding to the slowly flashing green DN key, or press oder , to select a slowly flashing green DN key, and then press .

Jump to:

Call Waiting

Toggle calls

During a conversation, if a second call arrives, you will hear a call waiting tone. You can answer the second call by disconnecting or holding the current call.

To disconnect the current call and then talk to the new party

- Press , while hearing the call waiting tone.
- Press .

To hold the current call and then talk to the new party

- Press , while hearing the call waiting tone.

- Press .

- Press the dial key corresponding to the flashing green DN key, or press or

, to select a flashing green DN key, and then press .

During a conversation, you can add an additional party to your call and establish a conference call.

1. Press , and then press 5 ("Conference").
2.Dial the party you want to add to the conversation, and then press .
3.After the called party answers, press , and then press 5 ("Conference").

During a conference, you can discharge other participants from the conference call. You can use this feature only when have started the conference yourself.
1. Press the key during the conference call.
2. Press then the key  .
3. Press the dial key or the key or , and then press to select the DN key (flexible key) that corresponds to the party you want to disconnect.
4. Press .
5. Press .
6. Press the dial key, or press or , nd then press , to select the DN key (flexible key) that
corresponds to the remaining party.

To go on-hook and end the conference call, pressu .

You can transfer a call to another phone extension (internal or external).

1. During an active call, press  .
2. Dial the party to whom you would like to transfer the call, then press .
3. Wait for the other party to answer, then announce the call.
4. Press .

- During an active call, press .

- Dial the party to whom you would like to transfer the call without making an enquiry.

- Press .

When accessing the voice menu of your voicemail system for the first time, you should also set up your personal answering system.

Please refer to the voice mail leaflet for detailed information.

1. Dial *793 on your Panasonic mobile handset or press button  to access the voice menu of your voice mail system.

2. Then select “0 Mailbox Options” to set up your voice mail.

3. Now press:

• „1“, to record a message in the event you are unavailable.
• „2“, to record a message in the event if the hone is busy.
• „3“, to record your name.
• „4“, to record a temporary announcement.

4. Now record your message and press “#” to end the recording.

- Dial *793 on your handset or

- Press  or

- Dial the extension numnber, which is assigned to your mailbox (see administration portal).